ENECON Corporation was established in January of 1990. Its principals and officers have almost 150 years in combined experience solving fluid flow related problems and / or plant life extension.

While nothing is right for every problem, ENECON products are often a time-saving, cost effective alternative to other repair methods and / or replacement. They have repeatedly been shown to be not only the right choice – but also the best choice – for many repairs. 

Depending on where you live, you can purchase ENECON products from one of our local agents at 133-135 Luong Dinh Cua Street, An Khanh Ward, HCM. or contact 0888 599 691

The type and scope of any repair will dictate the material requirements. Many applications can be completed with only a few dollars of material while other large-scale, complex projects may require substantially more material. Regardless of the investment, the relative cost of an ENECON solution is normally only a fraction of the cost of more conventional approaches.

We are proud that all ENECON products are made in the USA at our Medford, NY facility. In addition, we source all of our raw materials, supplies, advertising, etc. from USA sources. When you buy ENECON products you are helping to keep USA workers employed. In addition, ENECON exports our products to over 65 countries around the world, which helps strengthen our economy.

Since ENECON products are formulated to be safe and simple to use, many applications are carried out by the purchaser of the material. For more complex projects, turn-key application services are often available or can be arranged through ENECON or its local dealers / distributors. ENECON technical support is as close as your phone or email. We have technical support throughout the USA and in 65+ countries around the world. Whenever possible, a trained ENECON specialist will be onsite to provide technical assistance, review proper surface preparation, mixing and application tips, etc.

No, most ENECON products are 100% solids with no VOC’s [Volatile Organic Compounds] and minimal or no odors. No respirators or special protective equipment is needed.

Rubber gloves and protective clothing are recommended.  Before mixing & using the products read SDS carefully.  Keep out of reach of children.  The materials are solely for industrial and commercial use.

No, most ENECON products are 100% solids with no VOC’s [Volatile Organic Compounds] and minimal or no odors. Our products are often applied to the interior of commercial / industrial air handlers, where odors would be a critical product choice. Even in these cases, air can be circulated throughout the building while the ENECON product is curing.