Eneclad WBC – seal and protect concrete moisture surfaces
- Country Origin: USA
- Working Life: 50′ – 120′ depend on the environment temperature
- Shelf life: Unlimited
-
No odor
-
Excellent Abrasion & Impact Resistance
-
Safe and simple to use
-
Outstanding Adhesion
BREATHABLE, HIGH PERFORMANCE POLYMER COMPOSITE FLOOR PROTECTION SYSTEM
ENECLAD® WBC is a water based, two component coating system that has been specifically designed to seal and protect concrete surfaces that may experience moisture problems. ENECLAD® WBC is a breathable coating system that resists blistering due to hydrostatic pressure issues through the concrete. It bonds to virtually any mineral/cement substrate as well as wood.
ENECLAD WBC exhibits excellent adhesion to any type of concrete substrate. It also has great impact and abrasion resistance.
Technical data
Chemical resistance
| Coverage rate (diện tích phủ) / kg. @0.3mm: 2-2.5 m2 |
|---|
| Mixing ratio (Tỷ lệ trộn) Base / Activator (theo thể tích) : 2 / 5 |
| Mixing ratio (Tỷ lệ trộn) Base / Activator (theo trọng lượng) : 2 / 5 |
| Working Life (Thời gian thi công) 25ºC : 60 min / phút |
| Minimum Overcoating (Chờ phủ lớp tiếp theo tối thiểu) 25ºC : 8 h |
| Maximum Overcoating (Chờ phủ lớp tiếp theo tối đa) 25ºC : 24 h |
| Gasoline / Xăng —– EX |
|---|
| Kerosene / Dầu hỏa —– EX |
| 50% Anti-Freeze / Chất chống đông 50% —– EX |
| Transmission Fluid / Dầu hộp số —– EX |
| Power Steering Fluid / Dầu trợ lực lái —– EX |
| Motor Oil / Dầu động cơ —– EX |
| Detergent Solution / Dung dịch tẩy rửa —– EX |
| Trisodium Phosphate / Natri photphat |
| 20% Sodium chloride / Natri Clorua —– EX |
| 10% Hydrochloric Acid / Axit Clohydric —– EX |
| 10% Sodium hydroxide / Natri Hidroxit —– EX |
| 10% Sulfuric acid / Axit Sulfuric —– EX |
| EX – Suitable for most applications including immersion |
| G – Suitable for intermittent contact splashes etc |
| NR – Not Recommended |
Technical data
File isn't available
Chemical resistance
File isn't available
