Categories: , Tags: ,

Enecrete DuraQuartz – solutions to even the most difficult concrete repair

  • Extraordinary Adhesion
  • Outstanding Compressive Strength
  • 100% Solids
  • Safe & Simple To Use
Require quote
  • Z

    Extraordinary Adhesion

  • Z

    Outstanding Compressive Strength
  • Z

    100% Solids
  • Z

    Safe & Simple To Use
  • Z

    Use for:...
  • Z

    Concrete, Terrazzo
  • Z

    Brick, stone, marble stone
  • Z

    Wood, metal...

THE FINEST CONCRETE REPAIR AND PROTECTION SYSTEM AVAILABLE.

ENECRETE DuraQuartz is a three component, 100% solids, concrete repair compound specifically formulated and precisely engineered to provide solutions to even the most difficult concrete repair and protection problems.

ENECRETE DuraQuartz is extremely versatile. It can be mixed to any consistency – from a viscous liquid to a stiff mortar. DuraQuartz is not only for concrete; it will bond to marble, stone, slate, terrazzo, tiles,…even metal!

ENECRETE DuraQuartz is the professional’s choice for repairing critical areas subject to shock, impact, abrasion and chemical attack such as: containment dikes and troughs; spillways; chemical loading, storage and transfer areas; pump bases; anchor bolts; setting and grouting tiles; etc.

Technical data
Physical properties
Chemical resistance

Technical data

Mixed density (Khối lượng riêng (tỉ trọng) sau khi trộn) : 2.29 gm/cc
Coverage rate (diện tích phủ) /15 kg. @ 6mm: 1m2
Shelf life (Lưu kho) : Indefinite (vô thời hạn)
Volume Solids (đóng rắn) : 100%
Mixing ratio volume (Tỷ lệ trộn) Base / Activator: 5 / 2
Mixing ratio weight (Tỷ lệ trộn) Base / Activator: 2.4 /1
Working Life (Thời gian thi công) ở 25ºC : 60'
Light load (Tải nhẹ) ở 25ºC : 4 h
Full mechanical ( Đóng rắn hoàn toàn) ở 25ºC : 24 h
Chemical Immersion (Ngâm trong hóa chất) : 96 h
Volume capacity (thể tích) / kg: 6,550 cc

Physical properties

Compressive strength (Chịu lực (độ bền) nén)
ASTM C-109 : 15,500 psi (1085 kg/cm2)
Compressive modulus (modul khối)
ASTM C-109 : 640,000 psi (44,800 kg/cm2)
Compressive stress ( Ứng xuất nén)
ASTM C-109 : 13,000 psi (910 kg/cm2)
Flexural modulus (hệ số (modul) uốn )
ASTM D-790 : 310,000 psi (21,700 kg/cm2)
Coefficient of Expansion (hệ số giãn nở)
ASTM D-696: 3.5x10-6 in/°C
Hardness (độ cứng)- Shore D
ASTM D-2240: 88
Tensile Shear Adhesion steel ( Độ bền cắt bám dính trên thép )
ASTM D-1002: 1900 psi (133 kg/cm2)
Elcometer adhesion - to cementitious and mineral type substrates is generally greater than the cohesive strength of such materials.
Độ bám dính của Duraquartz trên bề mặt còn tốt hơn so với liên kết hiện hữu của bê tông
Surface resistivity ( Suất điện trở mặt )
ASTM D-257 : 1 x 10^15 ohms
Volume resistivity (Suất điện trở khối)
ASTM D-257 : 1 x 10^15 ohm/cm
Dielectric constant (Hằng số điện môi )
(ASTM D-150) : 7.5

Chemical resistance

Acetic acid 0-10%: ----- EX
Aceton ----- G
Aviation fuel (nhiên liệu máy bay)  ----- EX
Butyl alcohol (N-butanal) ----- EX
Calcium chloride / Canxi clorua ----- EX
Crude oil / Dầu mỏ. ----- EX
Diesel fuel / Dầu diezel ----- EX
Ethyl alcohol / Ethanol ----- G
Gasoline / Xăng ----- EX
Heptan (Heptane, Dipropyl Methan) ----- EX
Hydrochloric acid / Axit Clohydric (0-10%) ----- EX
Hydrochloric acid / Axit Clohydric (10-20%) ----- G
Kerosene / Dầu hỏa ----- EX
Methanol (Methyl alcohol) ----- G
Xylene ----- EX
Methyl ethyl ketone ----- G
Nitric acid / Axit Nitric (0-10%) ----- G
Palmitic Acid ----- EX
Phosphoric acid / Axit Phosphoric (0-5%) ----- EX
Phosphoric acid / Axit Phosphoric (0-10%) ----- G
Potassium chloride / Potassium Chloride (Kali Clorua) ----- EX
Propyl alcohol / Dung môi IPA (Rượu isopropanol) ----- G
Sodium chloride / Natri Clorua ----- EX
Sodium hydroxide / Natri Hidroxit ----- EX
Sulfuric acid / Axit Sulfuric (0-50%) ----- G
Tannic acid / Axit Tannic ----- EX
Toluen (Metylbenzen) ----- EX
Transformer oil / dầu biến áp ----- EX
EX – Suitable for most applications including immersion
G – Suitable for intermittent contact splashes etc
NR – Not Recommended

Related products

View all