Categories: ,

CeramAlloy HTL – outstanding erosion/corrosion resistance at elevated temperatures

  • Country Origin: USA
  • Working Life: 25′ – 90′ depend on the environment temperature
  • Shelf life: Unlimited
Require quote
  • Z

    Apply by Brush, Roller or Flexible Applicator
  • Z

    Requires No Heat
  • Z

    Unlimited Shelf Life
  • Z

    100% Solids
  • Z

    Safe & Simple To Use

  • Repairs and Protects...
  • Z

    Heat Exchanger Tube Sheets & Water Boxes
  • Z

    Drum Dryers
  • Z

    Pumps,
  • Z

    Valves & Pipework Housings & Tanks

The advantage of high performance polymer composites technologies used for repairing, resurfacing, industrial maintenance and fluid flow problems are saving you time, money cause quickly cures, easy to check the surface & temperature monitoring in plate instead waiting for full cure as the traditional.

 

 

A RECOGNIZED WORLD LEADER IN ADVANCED POLYMER TECHNOLOGIES.

OUTSTANDING EROSION/CORROSION RESISTANCE – EVEN AT ELEVATED TEMPERATURES!

METALCLAD® CeramAlloy® HTL is a two component, 100% solids, liquid polymer composite used for repairing, resurfacing and coating both damaged and new components to provide outstanding erosion and corrosion resistance at elevated temperatures.

When mixed, CeramAlloy® HTL is a viscous liquid. CeramAlloy® HTL cures to a hard, ceramic-like material with an extremely smooth surface finish. It has been specifically developed for elevated temperature applications.

METALCLAD® CeramAlloy® HTL is a High Performance Polymer Composite for resurfacing and protecting all types of fluid flow equipment from aggressive erosion and corrosion damage especially at elevated temperatures.

Technical data
Physical properties
Chemical resistance

Technical data

File isn't available

Physical properties

Compressive strength / Chịu lực (độ bền) nén
ASTM D-695 :  12,000 psi (840 kg/cm2)
Flexural strength / Chịu lực (độ bền) uốn
ASTM D-790 : 8,500 psi (595 kg/cm2)
ĐộHardness - Shore D / Độ cứng shore D cứng shore D 
ASTM D-2240: 87
Tensile Shear Adhesion steel / Độ bền cắt bám dính trên thép
ASTM D-1002 : 4,000 psi (280 kg/cm2)
Tensile Shear Adhesion aluminum / Độ bền cắt bám dính trên nhôm
ASTM D-1002 : 2,500 psi (175 kg/cm2)
Tensile Shear Adhesion copper / Độ bền cắt bám dính trên đồng
ASTM D-1002 : 3,000 psi (210 kg/cm2)
Tensile Shear Adhesion copper / Độ bền cắt bám dính trên đồng
ASTM D-1002 : 4,100 psi (287 kg/cm2)
Temperature Guidelines / Chịu nhiệt độ:
Dry / Khô - 520ºF / 270ºC
Wet / Ướt - 330ºF / 165ºC

Chemical resistance

File isn't available

Related products

View all