CeramAlloy CBX – abrasion resistance & extend the service life
- Country Origin: USA
- Working Life: 15′ – 30′ depend on the environment temperature
- Shelf life: unlimited
-
Extraordinary Abrasion Resistance
-
Trowelable
-
Unlimited Shelf Life
-
100% Solids
-
Safe & Simple To Use
-
Use for...
-
Elbows, Pumps,
-
Chutes, Vibratory Feeders
-
Cyclones, Separators
-
Pipe, Water Boxes, Housings & Tanks,...
REPAIR AND PROTECT ALL TYPES OF EQUIPMENT SUBJECT TO VERY AGGRESSIVE ABRASION.
Engineered to repair deeply damaged components.
METALCLAD CeramAlloy CBX is a three component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of equipment subject to severe abrasion.
METALCLAD CeramAlloy CBX is a paste when mixed, so it is easily applied. When cured, however, CBX becomes a metal-hard, highly abrasion resistant compound engineered to repair deeply damaged components in the most aggressive abrasive environments.
METALCLAD CeramAlloy CBX is the best material to use to protect equipment subject to very aggressive abrasive environments.
Elbows, Pipes, Pumps, Chutes, Deflector Plates, Cyclones, Separators, Vibratory Feeders, Transfer Augers, etc.
Technical data
Physical properties
Chemical resistance
| Volume capacity per 5 kg / Thể tích / 5 kg : 110 in3 / 1790 cc |
|---|
| Mixed density / Khối lượng riêng (tỉ trọng) sau khi trộn : 0.100 lbs / in3 (2.76 gm / cc) |
| Coverage rate per 5 kg. @ 200 mils / Diện tích phủ / 5kg: 3.78 ft2 / 0.35 m2 (độ dày 5 mm) |
| Shelf life / Thời gian lưu kho : Indefinite / vô thời hạn |
| Volume Solids / Thể tích đóng rắn: 100% |
| Mixing ratio / Tỷ lệ trộn Base / Activator / Aggregate (by volume / theo thể tích) : 5 / 2 / 14 |
| Tỷ lệ trộn Base / Activator (by weight / theo trọng lượng) : 7 / 2 / 20 |
| Working Life / Thời gian thi công ở 25ºC : 20 phút |
| Cure Times / Thời gian đóng rắn ở 25ºC : sau 24 giờ |
| Full Cure/ Thời gian đóng rắn hoàn toàn ở 25ºC : sau 48 giờ |
| Compressive strength / Chịu lực (độ bền) nén |
|---|
| (ASTM D-695) : 16,000 psi (1125 kg/m2) |
| Flexural strength / Chịu lực (độ bền) uốn |
| (ASTM D-790) : 6,000 psi (422 kg/cm2) |
| Hardness – Shore D / Độ cứng shore D |
| (ASTM D-2240) : 86 |
| Tensile Strength / Độ bền kéo |
| (ASTM D-2370) : 2,500 psi (176 kg/cm2) |
| Tensile Shear Adhesion steel / Độ bền cắt bám dính trên thép |
| (ASTM D-1002) : 4,000 psi (280 kg/cm2) |
| Tensile Shear Adhesion aluminum / Độ bền cắt bám dính trên nhôm |
| (ASTM D-1002) : 2,500 psi (175 kg/cm2) |
| Tensile Shear Adhesion copper / Độ bền cắt bám dính trên đồng |
| (ASTM D-1002) : 3,000 psi (210 kg/cm2) |
| Tensile Shear Adhesion stainless steel / Độ bền cắt bám dính trên thép không rỉ |
| (ASTM D-1002) : 4,100 psi (287 kg/cm2) |
| Acetic acid0-10%: —– G | Methanol —– G |
|---|---|
| Ammonium hydroxide (amoniac) (0-10%) —– EX | Mineral Oil / Dầu khoáng —– EX |
| Aviation fuel (nhiên liệu máy bay) —– EX | Nitric acid / Axit Nitric (0-10%) —– EX |
| Butyl alcohol (N-butanal) —– EX | Nitric acid / Axit Nitric (10-20%) —– G |
| Calcium chloride / Canxi clorua —– EX | Phosphoric acid / Axit Phosphoric (0-10%) —– G |
| Crude oil / Dầu mỏ. —– EX | Potassium chloride / Potassium Chloride (Kali Clorua) —– EX |
| Diesel fuel / Dầu diezel —– EX | Propyl alcohol / Dung môi IPA (Rượu isopropanol) —– EX |
| Ethyl alcohol / Ethanol —– G | Sodium chloride / Natri Clorua —– EX |
| Gasoline / Xăng —– EX | Sodium hydroxide / Natri Hidroxit —– EX |
| Heptan (Heptane, Dipropyl Methan) —– EX | Sulfuric acid / Axit Sulfuric (0-10%) —– EX |
| Hydrochloric acid / Axit Clohydric (0-10%) —– EX | Sulfuric acid / Axit Sulfuric (10-20%) —– G |
| Hydrochloric acid / Axit Clohydric (10-20%) —– G | Toluen (Metylbenzen) —– EX |
| Kerosene / Dầu hỏa —– EX | Xylene —– EX |
| EX – Suitable for most applications including immersion | |
| G – Suitable for intermittent contact splashes etc | |
| NR – Not Recommended”””” |
Technical data
File isn't available
Physical properties
File isn't available
Chemical resistance
File isn't available
Related products
-
CeramAlloy CL+AC – ceramic polymer, fluid flow erosion, corrosion resistance
-
DuraWrap – carbon fiber repair, reclaim, reinforce & extend the life of all type pipes, tanks
-
DurAlloy – repairs, rebuild metal surface
-
CeramAlloy HTP – outstanding erosion/corrosion resistance at elevated temperatures
-
CeramAlloy HTL – outstanding erosion/corrosion resistance at elevated temperatures
-
CeramAlloy EBX – abrasion resistance & extend the service life
-
CeramAlloy CL+ outstanding erosion/corrosion resistance nuclear environment
-
CeramAlloy CP+ outstanding erosion/corrosion resistance nuclear environment